Issue date:09.08.2012
680
Germany: +49 621 776-4411
Consider the General Notes on the Information in the Pepperl+Fuchs Product Catalogs
Pepperl+Fuchs Group
fa-info@de.pepperl-fuchs.com
USA: +1 330 486 0001
fa-info@us.pepperl-fuchs.com
Singapore: +65 6779 9091
fa-info@sg.pepperl-fuchs.com
Copyright Pepperl+Fuchs
Ultraschallsensoren,
Ultrasonic Sensor Accessories
3
.5
Accessories for Ultrasonic Sensors
Technical Data
For detailed data and product description, see the data sheet at
Model number
3
RX4000-PF
Function
PC interface
Description
Using this PC interface and the corresponding software, you can adapt ultrasonic
sensors of a specific series to the requirements of your application. It is also pos-
sible to parameterize several sensors identically.
The start and end of a sensor's detection range can be stored and copied to other
sensors at the press of a button.
Technical Data
For detailed data and product description, see the data sheet at
Model number
UB-PROG2
Function
Programming unit
Description
The device can be switched between the V15 cable connection box and the V15
plug connection at the sensor for the Teach-in process.
The trip points/measurement window and the output function are taught in using
sensors A1 and A2 in accordance with the diagram provided.
The taught in trip points and functions are retained after the programming unit has
been removed and/or the operating voltage has been turned off at the sensor.
■
■
Simple Teach-in of trip points A1/
A2 or the measurement window.
■
■
Easy selection of output function:
window operation, NO contact/NC
contact function.
One trip point, NO contact/NC
contact function.
Monitoring of detection range.
For the following types of ultrasonic sensors:
UB300
UB400
UB500
UB800
UB1000
UB2000
UB4000
UB6000
-12
GM
-18
GM40
-18
GM75
-30
GM
-
F42(S)
-
F54
-
E4
-
E5
-
I
-
U
-
V15
...
where the Teach-in input is at pin 2.
Technical Data
For detailed data and product description, see the data sheet at
Model number
UB-PROG3
Function
Programming unit
Description
The unit can be switched between the V15 cable connection box and the V15 plug
connection at the sensor for the Teach-in process.
The trip points/measurement window and the output function are taught in using
sensors A1 and A2 in accordance with the diagram provided.
The taught in trip points and functions are retained after the programming unit has
been removed and/or the operating voltage has been turned off at the sensor.
■
■
Simple Teach-in of trip points A1/
A2 or the measurement window.
■
■
Easy selection of output function:
window operation, NO contact/NC
contact function.
One trip point, NO contact/NC
contact function.
Monitoring of detection range.
For the following types of ultrasonic sensors:
UB500
UB1000 -18GM75
-
E01
-
E23
-
E6
-
E7
-
V15
...
where the Teach-in input is at pin 2.
