Page 346 - Sensors and Systems - North American Catalog
Basic HTML Version
Proximity Sensors,
Inductive Sensors,
Rotational Speed Monitors
1
.1.7
Proximity Sensors,
Inductive Sensors,
Dual Sensors for Clamping Systems
1
.1.6
1
.1.5
Sensors and Systems for Factory Automation
Issue 2012
344
Germany: +49 621 776-4411
Refer to General Notes Relating to Product Information
Pepperl+Fuchs Group
USA: +1 330 486 0001
Singapore: +65 6779 9091
Copyright Pepperl+Fuchs
Inductive Sensors
Accessorie -F25 Series
The following actuators are made from conductive plastic that prevents build-up of electrostatic charge and therefore can be used in hazardous areas.
The adjustment surface of the BT65XA and BT115XA actuators is made out of stainless steel (V2A) with openings at the actuating positions. This results
in an inverted operating principle.
Actuators (Pucks) for the -F31 / -F31K / -F31K2 Series with Fixed Switching Positions
Actuator
Drive shaft
diameter
Shaft height Mounting hole
pattern
Notes
Illustration
BT65A
< 58 mm
20 mm
and
30 mm
30 mm x 80 mm
Snap ring diameter max.
65 mm,
Snap ring height max. 6 mm.
For right and left rotating drives
with 90°/180° rotation.
BT65X
BT65XA
BT115A
< 90 mm
30 mm
and
50 mm
30 mm x 130 mm
Snap ring diameter max.
110 mm,
Snap ring height max. 7 mm.
For right and left rotating drives
with 90°/180° rotation.
BT115X
BT115XA
Actuator
Drive shaft
diameter
Shaft height Mounting hole
pattern
Notes
Illustration
BT65B
< 58 mm
20 mm
and
30 mm
*)
30 mm x 80 mm
Snap ring diameter max.
65 mm,
snap ring height max. 6 mm
BT115B
< 90 mm
30 mm
and
50 mm
30 mm x 130 mm
Snap ring diameter max.
110 mm,
snap ring height max. 7 mm
*)
30 mm using MH-BT65B mounting base
Actuators (Pucks) for the -F31 / -F31K Series with Adjustable Sensing Positions
MH-BT65B Mounting Base
MH-BT65B
Mounting plate for using BT65B actuators on drives with:
hole dimension 80 mm x 30 mm
hole dimension 130 mm x 30 mm
and drive shaft height 30 mm
